How to Import Dot3D Scan Data into AutoCAD

How to Import Dot3D Scan Data into AutoCAD

OPTION 1: Export to the .RCS format directly from Dot3D on Windows and insert/attach the RCS file straight into your AutoCAD project.
NOTE: RCS files can only be exported directly from Dot3D on Windows. If scanning from Android or iOS, please first bring the DP file into Dot3D Edit on Windows for conversion to RCS.
OPTION 2: Open your .DP scan file in Autodesk ReCap on Windows, export to .RCS from there, and then insert/attach the RCS file into your AutoCAD project.
NOTE: Please leave the import units set to meters during import.
NOTE: To maintain the density of your scans, it is recommended you bring the decimation down to 0 in the settings tab during both import and export from Autodesk ReCap.



    • Related Articles

    • How to Import Dot3D Scan Data into Autodesk Revit

      OPTION 1: Export to the .RCS format directly from Dot3D on Windows and insert/attach the RCS file straight into your Revit project. NOTE: RCS files can only be exported directly from Dot3D on Windows. If scanning from Android or iOS, please first ...

    • How to Import Dot3D Scan Data into Autodesk Inventor

      OPTION 1: Export to the .RCS format directly from Dot3D on Windows and insert/attach the RCS file straight into your Inventor project. NOTE: RCS files can only be exported directly from Dot3D on Windows. If scanning from Android or iOS, please first ...

    • How to Import Dot3D Scan Data into Navisworks

      OPTION 1: Export to the .RCS format directly from Dot3D on Windows and insert/attach the RCS file straight into your Navisworks project. NOTE: RCS files can only be exported directly from Dot3D on Windows. If scanning from Android or iOS, please ...

    • How to Import Dot3D Scans into Autodesk ReCap

      Step 1: Import Point Cloud in .DP format (also supported: E57, RCS, LAS, LAZ, PTS, PTX, PTG) Step 2: During import, go to Advanced Settings. Make sure the Import Units are set to Meters. It is also recommended to bring the decimation down to 0. Step ...

    • How to import Dot3D scan data to My3D.Cloud

      My3D.Cloud can be used to store and share 3D scan data. Dot3D data can be uploaded to it for easy collaboration and sharing. Step 1: Hit "Create New" Step 2: Fill out the needed information about your scan project, and then press "Save" Step 3: ...