Complete List of 3D Depth Cameras Supported by Dot3D

List of 3D Depth Cameras Supported by Dot3D

The following depth cameras are supported for 3D scanning with Dot3D:

1. iOS LiDAR Camera (iOS only, embedded)
  1. 0.33-5 m range (1-16 ft). Requires iPhone Pro, iPhone Pro Max, or iPad Pro.
  2. Recommended for versatility, tracking, & built-into-your-device convenience.
  3. Both Dot3D Pro and Dot3D Prime support use of integrated iOS LiDAR cameras.
2. Orbbec Gemini 336L - $379 USD (Windows/Android only, USB-C connection)
  1. 0.5-5 m range (1.5-16 ft). Recommended for range, FOV, and Windows/Android compatibility.
  2. A Dot3D Prime license is required for use of Orbbec cameras on Windows/Android.
3. RealSense D455f - $439 USD (Windows/Android only, USB-C connection)
     or RealSense D455/D456 (very similar models)
  1. 0.33-4.2 m range (1-14 ft). Recommended for range, FOV, and Windows/Android compatibility.
  2. A Dot3D Prime license is required for use of RealSense cameras on Windows/Android.
4. Q3D AuraGO LiDAR (COMING SOON) - $2990 USD (iOS Pro/Max models only, USB-C connection)
  1. 3-20 m range (10-65 ft). Augments the internal iOS LiDAR camera.
  2. Recommended as an add-on option for range extension on iOS.
  3. A Dot3D Prime license is required for use of Q3D cameras on iOS.
5. RealSense D415 Depth Camera - $272 (Windows/Android only, USB-C connection)
  1. 0.5-3.0 m range (1.5-10 ft). Recommended for its affordability and Windows/Android compatibility.
  2. A Dot3D Prime license is required for use of RealSense cameras on Windows/Android.
6. RealSense D435 / D435i Depth Cameras (Windows/Android only, USB-C connection)
  1. Supported but not recommended over the other options for spatial 3D scanning purposes.
  2. A Dot3D Prime license is required for use of RealSense cameras on Windows/Android.
7. DPI-10 Kit (complete hardware kit with built-in, DP-Calibrated Carmine 1.082 sensor)
     or DPI-X Kit (smaller, mountable, but less rugged/complete version of DPI camera kit)
  1. 0.5-3.7 m range (1.5-12 ft). This camera has been discontinued.
  2. Previously recommended for room-scale, indoor-only scanning.
  3. A Dot3D Prime license is required for use of the DPI-10 or DPI-X on Windows/Android.
8. DPI-10SR Kit (complete hardware kit with built-in, DP-Calibrated Carmine 1.09 sensor)
     or DPI-XSR Kit (smaller, mountable, but less rugged/complete version of DPI camera kit)
  1. 0.3-2.0 m range (1-6 ft). This camera has been discontinued.
  2. Previously recommended for close-range, indoor-only scanning.
  3. A Dot3D Prime license is required for use of the DPI-10SR or DPI-XSR on Windows/Android.
9.  Intel RealSense L515 LiDAR Camera (Windows/Android only, USB-C connection)
  1. 0.5-6.0 m range (1.5-20 ft). This camera has been discontinued.
  2. Previously recommended for fully-enclosed, indoor-only scanning.
  3. A Dot3D Prime license is required for use of RealSense cameras on Windows/Android.


    • Related Articles

    • List of GNSS / RTK Receivers Supported by Dot3D Prime

      The following GNSS / RTK receivers are supported for 3D scanning with real-time corrections in Dot3D Prime: Bad Elf Flex Mini (Extreme) Emlid Reach RX Emlid Reach RX2 General Laser GLRM Leica Zeno FL100 plus Robota Robodot Touch Trimble DA2 + ...

    • Which Intel® RealSense™ depth camera is recommended for use with Dot3D Scan/Pro?

      Of the current lineup of Intel® RealSense™ depth cameras (L515, D455, D415, D435, D435i), we primarily recommend the L515 and D455 for the best results when paired with Dot3D for 3D scanning purposes. While there are many factors at play here, the ...

    • How to Use Dot3D Pro with a PrimeSense Carmine Depth Camera

      Please first consider purchasing a DPI Kit. These complete handheld 3D scanning solutions each come with individual DotProduct factory calibration files, which greatly improve the capabilities of the built-in sensor and the quality of the resulting ...

    • Getting Started with Dot3D Pro & Dot3D Scan for Intel RealSense

      Please see below for a getting started tutorial on Dot3D Pro and Dot3D Scan software for use with Intel RealSense depth cameras: www.dotproduct3d.com/scanprodemo It is recommended that new users review this video both before and after capturing their ...

    • Getting Started with the DPI-8S & DPI-8S SR 3D Scanners

      Please see below for a an out-of-the-box tutorial on the DPI-8S and DPI-8S SR handheld 3D scanning kits, powered by Dot3D Pro software: www.dotproduct3d.com/dpi8stutorial It is recommended that new users review this video both before and after ...