Dot3D Tutorial: Registering Multiple DP Scans with AprilTags in Dot3D Pro
This DotProduct video tutorial walks us through the full procedure to register 2 DP scans to each other using just AprilTag targets and Dot3D Pro (3.2 or higher). The two scans shown comprise the first and second floor of a house under construction, each captured with the DPI-10 and optimized separately beforehand. They are registered via AprilTags in Dot3D Pro, and shown aligned in Autodesk ReCap. This procedure can be performed in Dot3D Pro or in Dot3D Edit with data captured from Dot3D Pro.
Related Articles
How to Register Multiple DP Scans to Each Other
You have various options for linking multiple 3D scans into the same coordinate system: 1. Register using AprilTags in Dot3D Pro. Please see below for a video on this capability: Dot3D 5.0 Tutorial: Multi-Scan Registration with AprilTags (Dot3D 5.0 & ...
Targeting: How to Reference Survey Control Coordinates in Dot3D 5.0 & Up
1. Obtain a minimum of 3 AprilTag target coordinates (i.e. from survey instrument, measurement, reference model, another point cloud, etc.) 2. Set up a .txt target control file in the following format: AprilTag #, x, y, z AprilTag #, x, y, z AprilTag ...
Using AprilTags for Loop Closure in Dot3D
Overview: AprilTags for Loop Closure provide a way for Dot3D to identify 3D points in the scene across different points in time. They do not require any additional measurement or manual input and will never decrease your optimized data quality, so ...
Tutorial: Multi-Scan Registration with AprilTags in Dot3D
This quick tutorial covers the full process of accurately linking multiple Dot3D scans to each other after capture (in Dot3D 5.0 & up). Step-by-step guide: Introduction & Setup (00:00) Step 1: Open Scan 1 (01:50) Step 2: Set Coordinate System for ...
Dot3D Feature History
Dot3D 6.0.0: (iOS & Windows) - Compatibility with Trimble DA2 GNSS Receiver for intelligent drift correction and geo-referencing - Internal GPS/GNSS access for recording trajectories while scanning and geo-referencing data - Geo-referencing to global ...