Dot3D Tutorial (Dot3D Pro 4.0)

• Related Articles

• Getting Started with the DPI-8X & DPI-8X SR 3D Scanners

  Please see below for a getting started tutorial on the DPI-8X and DPI-8S SR handheld 3D scanning kits, powered by Phi.3D software: www.dotproduct3d.com/dpi8xtutorial It is recommended that new users review this video both before and after capturing ...

• Getting Started with Dot3D Pro & Dot3D Scan for Intel RealSense

  Please see below for a getting started tutorial on Dot3D Pro and Dot3D Scan software for use with Intel RealSense depth cameras: www.dotproduct3d.com/scanprodemo It is recommended that new users review this video both before and after capturing their ...

• Getting Started with the DPI-8S & DPI-8S SR 3D Scanners

  Please see below for a an out-of-the-box tutorial on the DPI-8S and DPI-8S SR handheld 3D scanning kits, powered by Dot3D Pro software: www.dotproduct3d.com/dpi8stutorial It is recommended that new users review this video both before and after ...

• Pros / Cons and scanning Best Practices for Intel RealSense D415 and D435

  The Intel RealSense D455, D415, and D435 (as well as D435i) sensors are a great choice for scanning outdoors and/or in sunlight. However, as with all sensors, they have both advantages and limitations. Following best practices is highly recommended ...

• Minimum Specifications Required to Run Dot3D Pro (with supported Intel RealSense or DPI/PrimeSense 3D cameras)

  Minimum System Specs (All Platforms): - At least one USB 3.0 (or higher) compatible USB port - 1 GB of available hard drive / storage space - Internet connection (to activate your Dot3D license) Minimum System / OS Specs (Windows): - Intel Pentium ...