Getting Started with the DPI-8X and DPI-8X SR 3D Scanners

Getting Started with the DPI-8X & DPI-8X SR 3D Scanners

Please see below for a getting started tutorial on the DPI-8X and DPI-8S SR handheld 3D scanning kits, powered by Phi.3D software:


It is recommended that new users review this video both before and after capturing their first scan. If you have updated to Dot3D Pro for your DPI-8X/SR, please review the new Dot3D tutorial available here:


    • Related Articles

    • Getting Started with the DPI-8S & DPI-8S SR 3D Scanners

      Please see below for a an out-of-the-box tutorial on the DPI-8S and DPI-8S SR handheld 3D scanning kits, powered by Dot3D Pro software: www.dotproduct3d.com/dpi8stutorial It is recommended that new users review this video both before and after ...

    • Getting Started with Dot3D Pro & Dot3D Scan for Intel RealSense

      Please see below for a getting started tutorial on Dot3D Pro and Dot3D Scan software for use with Intel RealSense depth cameras: www.dotproduct3d.com/scanprodemo It is recommended that new users review this video both before and after capturing their ...

    • Dot3D Tutorial (Dot3D Pro 4.0)

      Please click below for a full length video tutorial covering our flagship Dot3D Pro handheld 3D scanning software. This video happens to be filmed from an Android phone equipped with an Intel RealSense L515 Kit, but almost all concepts also directly ...

    • Tutorial: Scale Bar Targeting in Phi.3D

      Please click below for the full video tutorial on scale bar targeting in Phi.3D: https://vimeo.com/145551710 In 2019, Phi.3D was replaced by Dot3D Pro. We recommend all DotProduct users upgrade to the latest Dot3D Pro.

    • Tutorial: Hard Targeting in Phi.3D

      Video Tutorial: https://youtu.be/0iY4aV6oFhs