How to Load Your Camera Calibration File into Dot3D

How to Load Your Camera Calibration File into Dot3D

If you have any calibration files (provided with purchase from DotProduct) associated with your depth camera(s), please follow the following steps to activate:

1. Add the calibration file(s) to the Calibrations folder on your device after installing Dot3D. This folder can be found in Documents\Dot3d\Calibrations on Windows or Internal Storage\Dot3d\Calibrations on Android.
2. Activate in Dot3D from Settings > Sensors/Cameras > Scan Calib. Folder.

Once activated, each calibration file should be automatically loaded whenever the relevant camera is plugged in.  To verify your calibration file is properly loaded at any time, please plug in the camera, navigate to Settings > Sensors/Cameras, select your camera from the left side tabs, and open the Calibration tab on the far right. There you will see the calibration file that is loaded.

Current list of supported 3D cameras that come with DotProduct calibration:
1. DPI-10 and DPI-X
2. DPI-10SR and DPI-XSR
3. Intel RealSense D455
4. Intel RealSense D415

    • Related Articles

    • 3D Camera Calibration

      What is 3D Camera Calibration? 3D Cameras are optical instruments. They can measure the depth of each pixel through a variety of methods (Stereo, Structured Light, LiDAR, ...). Each of these methods is founded on basic physical modeling of the ...

    • Intel RealSense Firmware Update Procedure

      Please follow the steps below to update your Intel RealSense camera to the latest available firmware from a Windows PC. It is recommended you check for available updates regularly, especially if you are running into any performance/connection issues ...

    • Dot3D Won't Connect to my Intel RealSense Camera

      Q: Dot3D does not recognize my Intel RealSense Camera or won't connect to it or wont allow me to start scanning with my RealSense camera. How can this be fixed? A1: Windows & Android: Make sure your computer or phone/tablet has a USB-3 compatible ...

    • Minimum Specifications Required to Run Dot3D Pro (with supported Intel RealSense or DPI/PrimeSense 3D cameras)

      Minimum System Specs (All Platforms): - At least one USB 3.0 (or higher) compatible USB port - 1 GB of available hard drive / storage space - Internet connection (to activate your Dot3D license) Minimum System / OS Specs (Windows): - Intel Pentium ...

    • Windows Dot3D Installation Instructions

      System Updates: Before installing onto your Windows device, please ensure your Windows OS is fully up to date. You can check for updates from System Settings. If you haven't updated in a while, you may have to do this multiple times. Compatibility ...