POD Import into Microstation from Dot3D

POD Import into Microstation from Dot3D

Dot3D will directly export Bentley POD files. When importing POD data from Dot3D (mm export) into MicroStation, you will likely need to apply a 0.001 scale conversion (mm to m).

    • Related Articles

    • How to Import Dot3D Scans into Autodesk ReCap

      Step 1: Import Point Cloud in .DP format (also supported: E57, RCS, LAS, LAZ, PTS, PTX, PTG) Step 2: During import, go to Advanced Settings. Make sure the Import Units are set to Meters. It is also recommended to bring the decimation down to 0. Step ...

    • How to Import Geospatial Scan Data from Dot3D into Autodesk ReCap (with large geo-coordinates preserved)

      Quick Summary: Step 1: Export to E57 from Dot3D. Make sure "Control Targets" or "GNSS" output transform is selected (depending which you used). Step 2: Import the E57 file into CloudCompare, and follow the prompts to "translate/rescale the entity". ...

    • How to Import Dot3D Scan Data into Autodesk Revit

      OPTION 1: Export to the .RCS format directly from Dot3D on Windows and insert/attach the RCS file straight into your Revit project. NOTE: RCS files can only be exported directly from Dot3D on Windows. If scanning from Android or iOS, please first ...

    • How to Import Dot3D Scan Data into Autodesk Inventor

      OPTION 1: Export to the .RCS format directly from Dot3D on Windows and insert/attach the RCS file straight into your Inventor project. NOTE: RCS files can only be exported directly from Dot3D on Windows. If scanning from Android or iOS, please first ...

    • How to Import Dot3D Scan Data into Navisworks

      OPTION 1: Export to the .RCS format directly from Dot3D on Windows and insert/attach the RCS file straight into your Navisworks project. NOTE: RCS files can only be exported directly from Dot3D on Windows. If scanning from Android or iOS, please ...