Tutorial: Scale Bar Targeting in Phi.3D

• Related Articles

• Tutorial: Hard Targeting in Phi.3D

  Video Tutorial: https://youtu.be/0iY4aV6oFhs

• Added Constraint Options for Improved Data Optimization

  Plane Parallelism While scanning a floor or wall, press the plane pick button and during optimization that information will automatically be used to enhance the accuracy of the scan AprilTags for Loop Closure ...

• Which versions of Dot3D allow for use of AprilTag targets?

  AprilTags can be used for loop closure (automatic single scene accuracy improvement by looping over unique tags multiple times) in any version of Dot3D with scanning capabilities enabled (Dot3D Scan, Dot3D X, and Dot3D Pro). However, to use AprilTags ...

• Getting Started with the DPI-8X & DPI-8X SR 3D Scanners

  Please see below for a getting started tutorial on the DPI-8X and DPI-8S SR handheld 3D scanning kits, powered by Phi.3D software: www.dotproduct3d.com/dpi8xtutorial It is recommended that new users review this video both before and after capturing ...

• Targeting: How to Reference Survey Control Coordinates in Dot3D 5.0 & Up

  1. Obtain a minimum of 3 AprilTag target coordinates (i.e. from survey instrument, measurement, reference model, another point cloud, etc.) 2. Set up a .txt target control file in the following format: AprilTag #, x, y, z AprilTag #, x, y, z AprilTag ...