Recommended Tablets for Use with Dot3D Pro

Recommended Tablets for Use with Dot3D Pro

3. Samsung Galaxy Tab S Series (not LITE or FE models)
4. iPad Pro (2020 & up) - built-in LiDAR camera, not compatible with external cameras
5. Any other Windows/Android tablet meeting these minimum specs
6. Rugged tablets from MobileDemand, DT Research, Zebra, etc.

    • Related Articles

    • DPI-10 Tablet Comparison: Microsoft Surface Go 2 vs. Samsung Galaxy Tab S6

      Please see below for a table outlining the differences between the two tablets supported by the DotProduct DPI-10 (or DPI-10SR) Handheld 3D Scanning Kit: the Microsoft Surface Go 2 (Windows) and the Samsung Galaxy Tab S6 (Android). The Microsoft ...
    • Which Intel® RealSense™ depth camera is recommended for use with Dot3D Scan/Pro?

      Of the current lineup of Intel® RealSense™ depth cameras (L515, D455, D415, D435, D435i), we primarily recommend the L515 and D455 for the best results when paired with Dot3D for 3D scanning purposes. While there are many factors at play here, the ...
    • Getting Started with Dot3D Pro & Dot3D Scan for Intel RealSense

      Please see below for a getting started tutorial on Dot3D Pro and Dot3D Scan software for use with Intel RealSense depth cameras: www.dotproduct3d.com/scanprodemo It is recommended that new users review this video both before and after capturing their ...
    • Windows Dot3D Installation Instructions

      System Updates: Before installing onto your Windows device, please ensure your Windows OS is fully up to date. You can check for updates from System Settings. If you haven't updated in a while, you may have to do this multiple times. Compatibility ...
    • Intel RealSense Firmware Update Procedure

      Please follow the steps below to update your Intel RealSense camera to the latest available firmware from a Windows PC. It is recommended you check for available updates regularly, especially if you are running into any performance/connection issues ...